When using the full depth on-site cold regeneration construction process, there is no need to use large mechanical equipment. The main mechanical equipment used includes regeneration equipment, stabilizer adding equipment, graders, and rollers.

冷再生機租賃主要的功能就在于粉碎與回收材料，它在全深式就地冷再生施工工藝操作中占據著主要的位置。冷再生機租賃可以粉碎、攪拌30cm厚度的瀝青路面及下臥層材料。在冷再生機設備中的滾筒中應該裝置可以進行替換的碳化鎢齒刀具，同時還應裝有人力操作與自動操作的裝置，另外這一設備也應可以有效的調節滾筒轉動速度，以此來適應不同厚度材質的粉碎與攪拌。

The main function of cold recycling machine leasing is to crush and recycle materials, which occupies a major position in the operation of the full depth on-site cold recycling construction process. The cold recycling machine rental can crush and mix asphalt pavement and underlying layer materials with a thickness of 30cm. In the cold regeneration equipment, tungsten carbide toothed cutting tools that can be replaced should be installed in the drum, and manual and automatic operation devices should also be installed. In addition, this equipment should be able to effectively adjust the rotation speed of the drum to adapt to the crushing and mixing of materials with different thicknesses.

另外再生材料中若含水量沒有達到既定標準那么就需要讓其在通過干燥的過程中達到既定含水量標準，另外若再生材料過干，那么也需要補足水分。冷再生機就可以配備相應的水噴頭對再生材料添加水分，在對再生材料粉碎以及攪拌的過程中也可以進行水分的添加，同時在這時添加水分也能更好的進行估計。

In addition, if the moisture content of recycled materials does not meet the established standards, it is necessary to make them meet the established moisture content standards during the drying process. In addition, if the recycled materials are too dry, it is also necessary to replenish the moisture. The cold regeneration machine can be equipped with corresponding water nozzles to add water to the recycled material. During the process of crushing and stirring the recycled material, water can also be added, and adding water at this time can also better estimate.

當在再生材料中添加穩定劑時，若添加的穩定劑為粉狀物，那么就需要定量攤鋪撒料。干粉穩定劑可以在粉碎瀝青層路面時加入也可以在冷再生機攪拌再生材料之前加入。不夠粉狀物的穩定劑會受到天氣因素的影響，另外在定量攤鋪撒料操作中也易于產生塵霧，對施工操作人員和環境有著極大的影響。當穩定劑為液體狀態加入到冷再生機中時，需要隨帶的計算機液體添加系統對各個液體添加量進行精準計算，同時也需要有一個與冷再生機前進速度相關的正互鎖系統，從而使得液體穩定劑的添加量跟隨著冷再生機運行的變化而發生變化。

When adding stabilizers to recycled materials, if the added stabilizers are in powder form, then a quantitative spreading of the material is required. Dry powder stabilizer can be added during the crushing of asphalt layer pavement or before the cold recycling machine mixes the recycled material. Insufficient stabilizer for powdery materials can be affected by weather factors, and in addition, it is prone to generate dust and mist during quantitative paving and spreading operations, which has a great impact on construction operators and the environment. When the stabilizer is added to the cold regeneration machine in a liquid state, the accompanying computer liquid addition system needs to accurately calculate the amount of each liquid added, and there is also a positive interlock system related to the forward speed of the cold regeneration machine, so that the amount of liquid stabilizer added changes with the operation of the cold regeneration machine.

當冷再生機完成粉碎與攪拌融合任務后就需要運用到平地機進行鋪設與整形操作。在再生材料鋪設中對其鋪設的厚度有著嚴謹?shù)男枨螅虼嗽趬郝窓C(jī)的選擇上就會偏重、大。因此經過壓路機的作用能夠讓再生材料的鋪設更加的完整、自然，能夠圓滿完成自身所需要完成的任務量，以此保證所鋪設的路面能夠滿足使用需求，能夠承載預期設計時的載重、荷載。

After the cold regeneration machine completes the task of crushing and mixing fusion, it needs to be applied to the grader for laying and shaping operations. In the laying of recycled materials, there is a strict demand for their thickness, so the selection of rollers will be biased and large. Therefore, through the action of a roller, the laying of recycled materials can be more complete and natural, and the required amount of tasks can be successfully completed. This ensures that the paved road surface can meet the usage requirements and bear the expected design load and load.

(3)全深式就地冷再生施工工藝技術

(3) Full depth on-site cold regeneration construction technology

首先要進行施工放樣，檢查全深式就地冷再生相關機械設施設備的準備情況，以及備料情況，接著再進行定格操作、鋪設水泥，在這一步驟中需要對水泥的用量進行細致的檢查。接著再使用冷再生機加水進行攪拌工作，這一步驟也需要檢查水泥劑量與用水量，一定要按照規定的標準以及需求使用相關材料，當攪拌完成后就將其鋪設至路面，通過使用羊角碾進行初步碾壓，在碾壓過程中需要檢測厚度，厚度也需要按照相關要求進行操作。接下來就使用平地機進行壓平操作，這一步驟中需要補充灑水，同時施工人員要配合平地機進行壓平操作，避免一些地方操作漏失。然后再運用光輪壓路機對平地機壓過的路面進行復壓，在復壓過后膠輪壓路機要最后再壓一次，同時在這個過程中要檢測路面各個指標是否達到了設計要求。當以上操作都符合操作規范與各項指標后就需要將修復的這段瀝青路面安置安全防撞筒覆蓋土工布進行養生，以便之后更好的投入到使用中。

Firstly, construction layout should be carried out to check the preparation status of mechanical facilities and equipment related to full depth on-site cold regeneration, as well as the preparation status of materials. Then, the freezing operation and laying of cement should be carried out. In this step, a detailed inspection of the cement dosage is required. Next, use a cold recycling machine to add water for mixing work. This step also requires checking the cement dosage and water consumption. It is necessary to use relevant materials according to the specified standards and requirements. After mixing is completed, it is laid on the road surface and preliminary rolling is carried out using a sheep horn roller. During the rolling process, the thickness needs to be tested and operated according to relevant requirements. Next, use a land leveler for flattening operation. In this step, additional watering is required, and construction personnel should cooperate with the land leveler for flattening operation to avoid missing operations in some areas. Then, a smooth wheel roller is used to re press the road surface that has been pressed by the grader. After re pressing, the rubber wheel roller needs to perform a final press, and during this process, it is necessary to check whether the various indicators of the road surface meet the design requirements. After all the above operations comply with the operating specifications and various indicators, it is necessary to place a safety anti-collision cylinder on the repaired asphalt pavement and cover it with geotextile for health preservation, in order to better put it into use in the future.

在運用全深式就地冷再生施工工藝時需要首先將機械設備配備好，按照施工過程中所需要運用到的各項機械設備來按套配備，以此保證該工藝在施展時井然有序，避免手忙腳亂現象的發生。當建設施工過程中所需的設施設備到位后就需要對所需要使用到的各種材料用量進行計算。例如在水泥穩定劑通過干粉狀加入時，應先計算出所需要摻和多少數量的水泥。公式為:水泥用量(kg/㎡)=壓實厚度(m)×最大干容量(kg/m?)×壓實度(%)×水泥劑量(%)/(1+水泥劑量(%))。通過這一公式來計算水泥用量，再推算水泥穩定劑用量。

When using the full depth on-site cold regeneration construction process, it is necessary to first equip the mechanical equipment according to the various mechanical equipment required during the construction process, in order to ensure that the process is carried out in an orderly manner and avoid the occurrence of confusion. After the necessary facilities and equipment are in place during the construction process, it is necessary to calculate the amount of various materials needed. For example, when adding cement stabilizers in a dry powder form, the required amount of cement should be calculated first. The formula is: cement dosage (kg/㎡)=compacted thickness (m) × Maximum dry capacity (kg/m?) × Compaction degree (%) × Cement dosage (%)/(1+cement dosage (%)). Calculate the cement dosage using this formula, and then calculate the cement stabilizer dosage.

在全深式就地冷再生施工工藝操作過程中還能夠運用到一種預布材料，其中預布水泥需要對預布的長度進行控制，以此保障冷再生機在攪拌再生材料時能夠正常運行。另外也需要依據冷再生機的行駛速度以及路面坡度、橫坡的大小來確定預布的長度，在一般情況中預布長度為80~150m，最好在冷再生機攪拌再生材料的同時進行撒布操作，避免過往車輛在行駛過程中車速過快帶動預布造成污染，從而也對材料造成一定的損失、浪費。

In the process of fully deep on-site cold recycling construction, a pre laid material can also be used, in which the length of the pre laid cement needs to be controlled to ensure the normal operation of the cold recycling machine when mixing the recycled material. In addition, the length of pre distribution also needs to be determined based on the driving speed of the cold recycling machine, as well as the size of the road slope and cross slope. In general, the pre distribution length is 80-150 meters. It is best to carry out the distribution operation while the cold recycling machine is stirring the recycled material to avoid pollution caused by passing vehicles driving too fast during the process, which also causes certain losses and waste of materials.

本文由冷再生機租賃為您提供，我們的網站是:http://lzqdw.com將以全心全意的熱情為您提供服務，歡迎您的訪問！

This article is provided by Cold Recycling Machine Rental for you. Our website is: http://lzqdw.com We will provide you with wholehearted enthusiasm and welcome your visit!